| perlrun - how to execute the Perl interpreter |
perlrun - how to execute the Perl interpreter
| perl | [ -sTtuUWX ] |
| [ -hv ] [ -V[:configvar] ] | |
| [ -cw ] [ -d[:debugger] ] [ -D[number/list] ] | |
| [ -pna ] [ -Fpattern ] [ -l[octal] ] [ -0[octal/hexadecimal] ] | |
| [ -Idir ] [ -m[-]module ] [ -M[-]'module...' ] | |
| [ -P ] | |
| [ -S ] | |
| [ -x[dir] ] | |
| [ -i[extension] ] | |
| [ -e 'command' ] [ -- ] [ programfile ] [ argument ]... | |
| [ -C [number/list] ] ]> |
The normal way to run a Perl program is by making it directly executable, or else by passing the name of the source file as an argument on the command line. (An interactive Perl environment is also possible--see the perldebug manpage for details on how to do that.) Upon startup, Perl looks for your program in one of the following places:
With methods 2 and 3, Perl starts parsing the input file from the
beginning, unless you've specified a -x switch, in which case it
scans for the first line starting with #! and containing the word
``perl'', and starts there instead. This is useful for running a program
embedded in a larger message. (In this case you would indicate the end
of the program using the __END__ token.)
The #! line is always examined for switches as the line is being parsed. Thus, if you're on a machine that allows only one argument with the #! line, or worse, doesn't even recognize the #! line, you still can get consistent switch behavior regardless of how Perl was invoked, even if -x was used to find the beginning of the program.
Because historically some operating systems silently chopped off kernel interpretation of the #! line after 32 characters, some switches may be passed in on the command line, and some may not; you could even get a ``-'' without its letter, if you're not careful. You probably want to make sure that all your switches fall either before or after that 32-character boundary. Most switches don't actually care if they're processed redundantly, but getting a ``-'' instead of a complete switch could cause Perl to try to execute standard input instead of your program. And a partial -I switch could also cause odd results.
Some switches do care if they are processed twice, for instance
combinations of -l and -0. Either put all the switches after
the 32-character boundary (if applicable), or replace the use of
-0digits by BEGIN{ $/ = "\0digits"; }.
Parsing of the #! switches starts wherever ``perl'' is mentioned in the line. The sequences ``-*'' and ``- '' are specifically ignored so that you could, if you were so inclined, say
#!/bin/sh -- # -*- perl -*- -p
eval 'exec perl -wS $0 ${1+"$@"}'
if $running_under_some_shell;
to let Perl see the -p switch.
A similar trick involves the env program, if you have it.
#!/usr/bin/env perl
The examples above use a relative path to the perl interpreter, getting whatever version is first in the user's path. If you want a specific version of Perl, say, perl5.005_57, you should place that directly in the #! line's path.
If the #! line does not contain the word ``perl'', the program named after the #! is executed instead of the Perl interpreter. This is slightly bizarre, but it helps people on machines that don't do #!, because they can tell a program that their SHELL is /usr/bin/perl, and Perl will then dispatch the program to the correct interpreter for them.
After locating your program, Perl compiles the entire program to an internal form. If there are any compilation errors, execution of the program is not attempted. (This is unlike the typical shell script, which might run part-way through before finding a syntax error.)
If the program is syntactically correct, it is executed. If the program
runs off the end without hitting an exit() or die() operator, an implicit
exit(0) is provided to indicate successful completion.
Unix's #! technique can be simulated on other systems:
extproc perl -S -your_switches
as the first line in *.cmd file (-S due to a bug in cmd.exe's
`extproc' handling).
ALTERNATE_SHEBANG (see the dosish.h file in the source
distribution for more information).
$ perl -mysw 'f$env("procedure")' 'p1' 'p2' 'p3' 'p4' 'p5' 'p6' 'p7' 'p8' !
$ exit++ + ++$status != 0 and $exit = $status = undef;
at the top of your program, where -mysw are any command line switches you
want to pass to Perl. You can now invoke the program directly, by saying
perl program, or as a DCL procedure, by saying @program (or implicitly
via DCL$PATH by just using the name of the program).
This incantation is a bit much to remember, but Perl will display it for
you if you say perl "-V:startperl".
Command-interpreters on non-Unix systems have rather different ideas
on quoting than Unix shells. You'll need to learn the special
characters in your command-interpreter (*, \ and " are
common) and how to protect whitespace and these characters to run
one-liners (see -e below).
On some systems, you may have to change single-quotes to double ones, which you must not do on Unix or Plan 9 systems. You might also have to change a single % to a %%.
For example:
# Unix
perl -e 'print "Hello world\n"'
# MS-DOS, etc.
perl -e "print \"Hello world\n\""
# Macintosh
print "Hello world\n"
(then Run "Myscript" or Shift-Command-R)
# VMS
perl -e "print ""Hello world\n"""
The problem is that none of this is reliable: it depends on the command and it is entirely possible neither works. If 4DOS were the command shell, this would probably work better:
perl -e "print <Ctrl-x>"Hello world\n<Ctrl-x>""
CMD.EXE in Windows NT slipped a lot of standard Unix functionality in when nobody was looking, but just try to find documentation for its quoting rules.
Under the Macintosh, it depends which environment you are using. The MacPerl shell, or MPW, is much like Unix shells in its support for several quoting variants, except that it makes free use of the Macintosh's non-ASCII characters as control characters.
There is no general solution to all of this. It's just a mess.
It may seem obvious to say, but Perl is useful only when users can easily find it. When possible, it's good for both /usr/bin/perl and /usr/local/bin/perl to be symlinks to the actual binary. If that can't be done, system administrators are strongly encouraged to put (symlinks to) perl and its accompanying utilities into a directory typically found along a user's PATH, or in some other obvious and convenient place.
In this documentation, #!/usr/bin/perl on the first line of the program
will stand in for whatever method works on your system. You are
advised to use a specific path if you care about a specific version.
#!/usr/local/bin/perl5.00554
or if you just want to be running at least version, place a statement like this at the top of your program:
use 5.005_54;
As with all standard commands, a single-character switch may be clustered with the following switch, if any.
#!/usr/bin/perl -spi.orig # same as -s -p -i.orig
Switches include:
$/) as an octal or
hexadecimal number. If there are no digits, the null character is the
separator. Other switches may precede or follow the digits. For
example, if you have a version of find which can print filenames
terminated by the null character, you can say this:
find . -name '*.orig' -print0 | perl -n0e unlink
The special value 00 will cause Perl to slurp files in paragraph mode. The value 0777 will cause Perl to slurp files whole because there is no legal byte with that value.
If you want to specify any Unicode character, use the hexadecimal
format: -0xHHH..., where the H are valid hexadecimal digits.
(This means that you cannot use the -x with a directory name that
consists of hexadecimal digits.)
perl -ane 'print pop(@F), "\n";'
is equivalent to
while (<>) {
@F = split(' ');
print pop(@F), "\n";
}
An alternate delimiter may be specified using -F.
-C flag controls some Unicode of the Perl Unicode features.
As of 5.8.1, the -C can be followed either by a number or a list
of option letters. The letters, their numeric values, and effects
are as follows; listing the letters is equal to summing the numbers.
I 1 STDIN is assumed to be in UTF-8
O 2 STDOUT will be in UTF-8
E 4 STDERR will be in UTF-8
S 7 I + O + E
i 8 UTF-8 is the default PerlIO layer for input streams
o 16 UTF-8 is the default PerlIO layer for output streams
D 24 i + o
A 32 the @ARGV elements are expected to be strings encoded in UTF-8
L 64 normally the "IOEioA" are unconditional,
the L makes them conditional on the locale environment
variables (the LC_ALL, LC_TYPE, and LANG, in the order
of decreasing precedence) -- if the variables indicate
UTF-8, then the selected "IOEioA" are in effect
For example, -COE and -C6 will both turn on UTF-8-ness on both
STDOUT and STDERR. Repeating letters is just redundant, not cumulative
nor toggling.
The io options mean that any subsequent open() (or similar I/O
operations) will have the :utf8 PerlIO layer implicitly applied
to them, in other words, UTF-8 is expected from any input stream,
and UTF-8 is produced to any output stream. This is just the default,
with explicit layers in open() and with binmode() one can manipulate
streams as usual.
-C on its own (not followed by any number or option list), or the
empty string "" for the $ENV{PERL_UNICODE}, has the same effect
as <-CSDL. In other words, the standard I/O handles and the default
open() layer are UTF-8-fied but only if the locale environment
variables indicate a UTF-8 locale. This behaviour follows the
implicit (and problematic) UTF-8 behaviour of Perl 5.8.0.
You can use -C0 (or "0" for $ENV{PERL_UNICODE}) to explicitly
disable all the above Unicode features.
The read-only magic variable ${^UNICODE} reflects the numeric value
of this setting. This is variable is set during Perl startup and is
thereafter read-only. If you want runtime effects, use the three-arg
open() (see open in the perlfunc manpage), the two-arg binmode() (see binmode in the perlfunc manpage),
and the open pragma (see the open manpage).
(In Perls earlier than 5.8.1 the -C switch was a Win32-only switch
that enabled the use of Unicode-aware ``wide system call'' Win32 APIs.
This feature was practically unused, however, and the command line
switch was therefore ``recycled''.)
BEGIN, CHECK, and
use blocks, because these are considered as occurring outside the
execution of your program. INIT and END blocks, however, will
be skipped.
= character.
See the perldebug manpage.
As an alternative, specify a number instead of list of letters (e.g., -D14 is equivalent to -Dtls):
1 p Tokenizing and parsing
2 s Stack snapshots
with v, displays all stacks
4 l Context (loop) stack processing
8 t Trace execution
16 o Method and overloading resolution
32 c String/numeric conversions
64 P Print profiling info, preprocessor command for -P, source file input state
128 m Memory allocation
256 f Format processing
512 r Regular expression parsing and execution
1024 x Syntax tree dump
2048 u Tainting checks
4096 (Obsolete, previously used for LEAKTEST)
8192 H Hash dump -- usurps values()
16384 X Scratchpad allocation
32768 D Cleaning up
65536 S Thread synchronization
131072 T Tokenising
262144 R Include reference counts of dumped variables (eg when using -Ds)
524288 J Do not s,t,P-debug (Jump over) opcodes within package DB
1048576 v Verbose: use in conjunction with other flags
2097152 C Copy On Write
All these flags require -DDEBUGGING when you compile the Perl
executable (but see the Devel::Peek manpage, the re manpage which may change this).
See the INSTALL file in the Perl source distribution
for how to do this. This flag is automatically set if you include -g
option when Configure asks you about optimizer/debugger flags.
If you're just trying to get a print out of each line of Perl code
as it executes, the way that sh -x provides for shell scripts,
you can't use Perl's -D switch. Instead do this
# If you have "env" utility env=PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program
# Bourne shell syntax $ PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program
# csh syntax % (setenv PERLDB_OPTS "NonStop=1 AutoTrace=1 frame=2"; perl -dS program)
See the perldebug manpage for details and variations.
//, "", or '', otherwise it will be
put in single quotes.
<> construct are to be
edited in-place. It does this by renaming the input file, opening the
output file by the original name, and selecting that output file as the
default for print() statements. The extension, if supplied, is used to
modify the name of the old file to make a backup copy, following these
rules:
If no extension is supplied, no backup is made and the current file is overwritten.
If the extension doesn't contain a *, then it is appended to the
end of the current filename as a suffix. If the extension does
contain one or more * characters, then each * is replaced
with the current filename. In Perl terms, you could think of this
as:
($backup = $extension) =~ s/\*/$file_name/g;
This allows you to add a prefix to the backup file, instead of (or in addition to) a suffix:
$ perl -pi 'orig_*' -e 's/bar/baz/' fileA # backup to 'orig_fileA'
Or even to place backup copies of the original files into another directory (provided the directory already exists):
$ perl -pi 'old/*.orig' -e 's/bar/baz/' fileA # backup to 'old/fileA.orig'
These sets of one-liners are equivalent:
$ perl -pi -e 's/bar/baz/' fileA # overwrite current file
$ perl -pi '*' -e 's/bar/baz/' fileA # overwrite current file
$ perl -pi '.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig'
$ perl -pi '*.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig'
From the shell, saying
$ perl -p -i.orig -e "s/foo/bar/; ... "
is the same as using the program:
#!/usr/bin/perl -pi.orig
s/foo/bar/;
which is equivalent to
#!/usr/bin/perl
$extension = '.orig';
LINE: while (<>) {
if ($ARGV ne $oldargv) {
if ($extension !~ /\*/) {
$backup = $ARGV . $extension;
}
else {
($backup = $extension) =~ s/\*/$ARGV/g;
}
rename($ARGV, $backup);
open(ARGVOUT, ">$ARGV");
select(ARGVOUT);
$oldargv = $ARGV;
}
s/foo/bar/;
}
continue {
print; # this prints to original filename
}
select(STDOUT);
except that the -i form doesn't need to compare $ARGV to $oldargv to know when the filename has changed. It does, however, use ARGVOUT for the selected filehandle. Note that STDOUT is restored as the default output filehandle after the loop.
As shown above, Perl creates the backup file whether or not any output is actually changed. So this is just a fancy way to copy files:
$ perl -p -i'/some/file/path/*' -e 1 file1 file2 file3...
or
$ perl -p -i'.orig' -e 1 file1 file2 file3...
You can use eof without parentheses to locate the end of each input
file, in case you want to append to each file, or reset line numbering
(see example in eof in the perlfunc manpage).
If, for a given file, Perl is unable to create the backup file as specified in the extension then it will skip that file and continue on with the next one (if it exists).
For a discussion of issues surrounding file permissions and -i, see Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl? in the perlfaq5 manpage.
You cannot use -i to create directories or to strip extensions from files.
Perl does not expand ~ in filenames, which is good, since some
folks use it for their backup files:
$ perl -pi~ -e 's/foo/bar/' file1 file2 file3...
Finally, the -i switch does not impede execution when no files are given on the command line. In this case, no backup is made (the original file cannot, of course, be determined) and processing proceeds from STDIN to STDOUT as might be expected.
@INC), and also tells the C preprocessor where to search for
include files. The C preprocessor is invoked with -P; by default it
searches /usr/include and /usr/lib/perl.
$/ (the input record
separator) when used with -n or -p. Second, it assigns $\
(the output record separator) to have the value of octnum so
that any print statements will have that separator added back on.
If octnum is omitted, sets $\ to the current value of
$/. For instance, to trim lines to 80 columns:
perl -lpe 'substr($_, 80) = ""'
Note that the assignment $\ = $/ is done when the switch is processed,
so the input record separator can be different than the output record
separator if the -l switch is followed by a -0 switch:
gnufind / -print0 | perl -ln0e 'print "found $_" if -p'
This sets $\ to newline and then sets $/ to the null character.
use module (); before executing your
program.
-Mmodule executes use module ; before executing your
program. You can use quotes to add extra code after the module name,
e.g., '-Mmodule qw(foo bar)'.
If the first character after the -M or -m is a dash (-)
then the 'use' is replaced with 'no'.
A little builtin syntactic sugar means you can also say
-mmodule=foo,bar or -Mmodule=foo,bar as a shortcut for
'-Mmodule qw(foo bar)'. This avoids the need to use quotes when
importing symbols. The actual code generated by -Mmodule=foo,bar is
use module split(/,/,q{foo,bar}). Note that the = form
removes the distinction between -m and -M.
LINE:
while (<>) {
... # your program goes here
}
Note that the lines are not printed by default. See -p to have lines printed. If a file named by an argument cannot be opened for some reason, Perl warns you about it and moves on to the next file.
Here is an efficient way to delete all files older than a week:
find . -mtime +7 -print | perl -nle unlink
This is faster than using the -exec switch of find because you don't have to start a process on every filename found. It does suffer from the bug of mishandling newlines in pathnames, which you can fix if you follow the example under -0.
BEGIN and END blocks may be used to capture control before or after
the implicit program loop, just as in awk.
LINE:
while (<>) {
... # your program goes here
} continue {
print or die "-p destination: $!\n";
}
If a file named by an argument cannot be opened for some reason, Perl warns you about it, and moves on to the next file. Note that the lines are printed automatically. An error occurring during printing is treated as fatal. To suppress printing use the -n switch. A -p overrides a -n switch.
BEGIN and END blocks may be used to capture control before or after
the implicit loop, just as in awk.
This option causes your program to be run through the C preprocessor before
compilation by Perl. Because both comments and cpp directives begin
with the # character, you should avoid starting comments with any words
recognized by the C preprocessor such as "if", "else", or "define".
If you're considering using -P, you might also want to look at the
Filter::cpp module from CPAN.
The problems of -P include, but are not limited to:
#! line is stripped, so any switches there don't apply.
A -P on a #! line doesn't work.
All lines that begin with (whitespace and) a # but
do not look like cpp commands, are stripped, including anything
inside Perl strings, regular expressions, and here-docs .
In some platforms the C preprocessor knows too much: it knows about
the C++ -style until-end-of-line comments starting with "//".
This will cause problems with common Perl constructs like
s/foo//;
because after -P this will became illegal code
s/foo
The workaround is to use some other quoting separator than "/",
like for example "!":
s!foo!!;
-x does not work with -P.
#!/usr/bin/perl -s
if ($xyz) { print "$xyz\n" }
Do note that --help creates the variable ${-help}, which is not compliant
with strict refs.
On some platforms, this also makes Perl append suffixes to the filename while searching for it. For example, on Win32 platforms, the ``.bat'' and ``.cmd'' suffixes are appended if a lookup for the original name fails, and if the name does not already end in one of those suffixes. If your Perl was compiled with DEBUGGING turned on, using the -Dp switch to Perl shows how the search progresses.
Typically this is used to emulate #! startup on platforms that don't support #!. This example works on many platforms that have a shell compatible with Bourne shell:
#!/usr/bin/perl
eval 'exec /usr/bin/perl -wS $0 ${1+"$@"}'
if $running_under_some_shell;
The system ignores the first line and feeds the program to /bin/sh,
which proceeds to try to execute the Perl program as a shell script.
The shell executes the second line as a normal shell command, and thus
starts up the Perl interpreter. On some systems $0 doesn't always
contain the full pathname, so the -S tells Perl to search for the
program if necessary. After Perl locates the program, it parses the
lines and ignores them because the variable $running_under_some_shell
is never true. If the program will be interpreted by csh, you will need
to replace ${1+"$@"} with $*, even though that doesn't understand
embedded spaces (and such) in the argument list. To start up sh rather
than csh, some systems may have to replace the #! line with a line
containing just a colon, which will be politely ignored by Perl. Other
systems can't control that, and need a totally devious construct that
will work under any of csh, sh, or Perl, such as the following:
eval '(exit $?0)' && eval 'exec perl -wS $0 ${1+"$@"}'
& eval 'exec /usr/bin/perl -wS $0 $argv:q'
if $running_under_some_shell;
If the filename supplied contains directory separators (i.e., is an absolute or relative pathname), and if that file is not found, platforms that append file extensions will do so and try to look for the file with those extensions added, one by one.
On DOS-like platforms, if the program does not contain directory separators, it will first be searched for in the current directory before being searched for on the PATH. On Unix platforms, the program will be searched for strictly on the PATH.
no warnings
qw(taint).
NOTE: this is not a substitute for -T. This is meant only to be used as a temporary development aid while securing legacy code: for real production code and for new secure code written from scratch always use the real -T.
dump()
operator instead. Note: availability of undump is platform
specific and may not be available for a specific port of Perl.
This switch has been superseded in favor of the new Perl code generator backends to the compiler. See the B manpage and the B::Bytecode manpage for details.
$^W variable) must
be used along with this option to actually generate the
taint-check warnings.
$ perl -V:man.dir
will provide strong clues about what your MANPATH variable should be set to in order to access the Perl documentation.
This switch really just enables the internal $^W variable. You
can disable or promote into fatal errors specific warnings using
__WARN__ hooks, as described in the perlvar manpage and warn in the perlfunc manpage.
See also the perldiag manpage and the perltrap manpage. A new, fine-grained warning
facility is also available if you want to manipulate entire classes
of warnings; see the warnings manpage or the perllexwarn manpage.
no warnings or $^W.
See the perllexwarn manpage.
use warnings or $^W.
See the perllexwarn manpage.
__END__ if there is trailing garbage to be ignored (the program
can process any or all of the trailing garbage via the DATA filehandle
if desired).
perl -V:path_sep).
When running taint checks (either because the program was running setuid or setgid, or the -T switch was used), neither variable is used. The program should instead say:
use lib "/my/directory";
It is conventional to start layer names with a colon e.g. :perlio to
emphasise their similarity to variable ``attributes''. But the code that parses
layer specification strings (which is also used to decode the PERLIO
environment variable) treats the colon as a separator.
An unset or empty PERLIO is equivalent to :stdio.
The list becomes the default for all perl's IO. Consequently only built-in layers can appear in this list, as external layers (such as :encoding()) need IO in order to load them!. See ``open pragma'' for how to add external encodings as defaults.
The layers that it makes sense to include in the PERLIO environment variable are summarised below. For more details see the PerlIO manpage.
:utf8 flag for the layer below.
Unlikely to be useful on its own in the global PERLIO environment variable.
You perhaps were thinking of :crlf:bytes or :perlio:bytes.
:perlio layer.
mmap() to
make (whole) file appear in the process's address space, and then
using that as PerlIO's ``buffer''. This may be faster in certain
circumstances for large files, and may result in less physical memory
use when multiple processes are reading the same file.
Files which are not mmap()-able revert to behaving like the :perlio
layer. Writes also behave like :perlio layer as mmap() for write
needs extra house-keeping (to extend the file) which negates any advantage.
The :mmap layer will not exist if platform does not support mmap().
sv_gets which implements perl's readline/<>
and in general attempts to minimize data copying.
:perlio will insert a :unix layer below itself to do low level IO.
binmode($fh). It makes the stream
pass each byte as-is without any translation. In particular CRLF
translation, and/or :utf8 intuited from locale are disabled.
Arranges for all accesses go straight to the lowest buffered layer provided by the configration. That is it strips off any layers above that layer.
In Perl 5.6 and some books the :raw layer (previously sometimes also
referred to as a ``discipline'') is documented as the inverse of the
:crlf layer. That is no longer the case - other layers which would
alter binary nature of the stream are also disabled. If you want UNIX
line endings on a platform that normally does CRLF translation, but still
want UTF-8 or encoding defaults the appropriate thing to do is to add
:perlio to PERLIO environment variable.
:stdio layer does not do CRLF translation even if that
is platforms normal behaviour. You will need a :crlf layer above it
to do that.
open(), read(), write(), lseek(), close()
:bytes
layer.)
On all platforms the default set of layers should give acceptable results.
For UNIX platforms that will equivalent of ``unix perlio'' or ``stdio''. Configure is setup to prefer ``stdio'' implementation if system's library provides for fast access to the buffer, otherwise it uses the ``unix perlio'' implementation.
On Win32 the default in this release is ``unix crlf''. Win32's ``stdio''
has a number of bugs/mis-features for perl IO which are somewhat
C compiler vendor/version dependent. Using our own crlf layer as
the buffer avoids those issues and makes things more uniform.
The crlf layer provides CRLF to/from ``\n'' conversion as well as
buffering.
This release uses unix as the bottom layer on Win32 and so still uses C
compiler's numeric file descriptor routines. There is an experimental native
win32 layer which is expected to be enhanced and should eventually replace
the unix layer.
PERLIO_DEBUG=/dev/tty perl script ...
and Win32 approximate equivalent:
set PERLIO_DEBUG=CON perl script ...
BEGIN { require 'perl5db.pl' }
cmd.exe /x/d/c
on WindowsNT and command.com /c on Windows95. The value is considered
to be space-separated. Precede any character that needs to be protected
(like a space or backslash) with a backslash.
Note that Perl doesn't use COMSPEC for this purpose because COMSPEC has a high degree of variability among users, leading to portability concerns. Besides, perl can use a shell that may not be fit for interactive use, and setting COMSPEC to such a shell may interfere with the proper functioning of other programs (which usually look in COMSPEC to find a shell fit for interactive use).
perl -V:d_mymalloc is 'define').
If set, this causes memory statistics to be dumped after execution. If set
to an integer greater than one, also causes memory statistics to be dumped
after compilation.
encoding pragma without an explicit encoding name, the
PERL_ENCODING environment variable is consulted for an encoding name.
The default behaviour is to randomise unless the PERL_HASH_SEED is set.
If Perl has been compiled with -DUSE_HASH_SEED_EXPLICIT, the default
behaviour is not to randomise unless the PERL_HASH_SEED is set.
If PERL_HASH_SEED is unset or set to a non-numeric string, Perl uses the pseudorandom seed supplied by the operating system and libraries. This means that each different run of Perl will have a different ordering of the results of keys(), values(), and each().
See Algorithmic Complexity Attacks in the perlsec manpage for more information.
unsafe the pre-Perl-5.8.0
signals behaviour (immediate but unsafe) is restored. If set to
safe the safe (or deferred) signals are used.
See Deferred Signals (Safe signals) in the perlipc manpage.
"1" is not the right way to
``enable Unicode'' (whatever that would mean). You can use "0" to
``disable Unicode'', though (or alternatively unset PERL_UNICODE in
your shell before starting Perl). See the description of the -C
switch for more information.
Perl also has environment variables that control how Perl handles data specific to particular natural languages. See the perllocale manpage.
Apart from these, Perl uses no other environment variables, except to make them available to the program being executed, and to child processes. However, programs running setuid would do well to execute the following lines before doing anything else, just to keep people honest:
$ENV{PATH} = '/bin:/usr/bin'; # or whatever you need
$ENV{SHELL} = '/bin/sh' if exists $ENV{SHELL};
delete @ENV{qw(IFS CDPATH ENV BASH_ENV)};
| perlrun - how to execute the Perl interpreter |