| libnetFAQ - libnet Frequently Asked Questions |
libnetFAQ - libnet Frequently Asked Questions
This document is distributed with the libnet distribution, and is also available on the libnet web page at
http://search.cpan.org/~gbarr/libnet/
You may mail corrections, additions, and suggestions to me gbarr@pobox.com.
Copyright (c) 1997-1998 Graham Barr. All rights reserved. This document is free; you can redistribute it and/or modify it under the terms of the Artistic License.
This information is offered in good faith and in the hope that it may be of use, but is not guaranteed to be correct, up to date, or suitable for any particular purpose whatsoever. The authors accept no liability in respect of this information or its use.
libnet is a collection of perl5 modules which all related to network programming. The majority of the modules available provided the client side of popular server-client protocols that are used in the internet community.
libnet has been know to work with versions of perl from 5.002 onwards. However if your release of perl is prior to perl5.004 then you will need to obtain and install the IO distribution from CPAN. If you have perl5.004 or later then you will have the IO modules in your installation already, but CPAN may contain updates.
The only modules you will need installed are the modules from the IO distribution. If you have perl5.004 or later you will already have these modules.
libnet itself is an entirely perl-code distribution so it should work on any machine that perl runs on. However IO may not work with some machines and earlier releases of perl. But this should not be the case with perl version 5.004 or later.
The latest libnet release is always on CPAN, you will find it in
http://www.cpan.org/modules/by-module/Net/
The latest release and information is also available on the libnet web page at
http://search.cpan.org/~gbarr/libnet/
An example taken from an article posted to comp.lang.perl.misc
#!/your/path/to/perl
# a module making life easier
use Net::FTP;
# for debuging: $ftp = Net::FTP->new('site','Debug',10);
# open a connection and log in!
$ftp = Net::FTP->new('target_site.somewhere.xxx');
$ftp->login('username','password');
# set transfer mode to binary
$ftp->binary();
# change the directory on the ftp site
$ftp->cwd('/some/path/to/somewhere/');
foreach $name ('file1', 'file2', 'file3') {
# get's arguments are in the following order:
# ftp server's filename
# filename to save the transfer to on the local machine
# can be simply used as get($name) if you want the same name
$ftp->get($name,$name);
}
# ftp done!
$ftp->quit;
To transfer files without <LF><CR> translation Net::FTP provides
the binary method
$ftp->binary;
The FTP protocol does not have a command for changing the permissions of a file on the remote server. But some ftp servers may allow a chmod command to be issued via a SITE command, eg
$ftp->quot('site chmod 0777',$filename);
But this is not guaranteed to work.
Passing an argument of ``'' to ->cwd() has the same affect of calling ->cwd()
without any arguments. Turn on Debug (See below) and you will see what is
happening
$ftp = Net::FTP->new($host, Debug => 1);
$ftp->login;
$ftp->cwd("");
gives
Net::FTP=GLOB(0x82196d8)>>> CWD /
Net::FTP=GLOB(0x82196d8)<<< 250 CWD command successful.
The Firewall option is only for support of one type of firewall. The type supported is an ftp proxy.
To use Net::FTP, or any other module in the libnet distribution, through a SOCKS firewall you must create a socks-ified perl executable by compiling perl with the socks library.
Net::FTP implements the most popular ftp proxy firewall approach. The scheme
implemented is that where you log in to the firewall with user@hostname
I have heard of one other type of firewall which requires a login to the
firewall with an account, then a second login with user@hostname. You can
still use Net::FTP to traverse these firewalls, but a more manual approach
must be taken, eg
$ftp = Net::FTP->new($firewall) or die $@;
$ftp->login($firewall_user, $firewall_passwd) or die $ftp->message;
$ftp->login($ext_user . '@' . $ext_host, $ext_passwd) or die $ftp->message.
FTP servers usually listen on the same port number, port 21, as any other FTP server. But there is no reason why this has to be the case.
If you pass a port number to Net::FTP then it assumes this is the port number of the final destination. By default Net::FTP will always try to connect to the firewall on port 21.
Net::FTP uses IO::Socket to open the connection and IO::Socket allows
the port number to be specified as part of the hostname. So this problem
can be resolved by either passing a Firewall option like "hostname:1234"
or by setting the ftp_firewall option in Net::Config to be a string
in in the same form.
The answer to this is ``maybe''. The FTP protocol does not specify a command to change
file permissions on a remote host. However many servers do allow you to run the
chmod command via the SITE command. This can be done with
$ftp->site('chmod','0775',$file);
Net::FTP, like several other packages in libnet, inherits from Net::Cmd, so all the methods described in Net::Cmd are also available on Net::FTP objects.
The quick answer is because they are easy to implement yourself. The long answer is that to write these in such a way that multiple platforms are supported correctly would just require too much code. Below are some examples how you can implement these yourself.
sub mput {
my($ftp,$pattern) = @_;
foreach my $file (glob($pattern)) {
$ftp->put($file) or warn $ftp->message;
}
}
sub mget {
my($ftp,$pattern) = @_;
foreach my $file ($ftp->ls($pattern)) {
$ftp->get($file) or warn $ftp->message;
}
}
The part of an Email address which follows the @ is not necessarily a hostname, it is a mail domain. To find the name of a host to connect for a mail domain you need to do a DNS MX lookup
Net::SMTP implements the SMTP protocol. The DNS MX lookup is not part of this protocol.
Well it may seem that way, but it does not. The verify method returns true if the command succeeded. If you pass verify an address which the server would normally have to forward to another machine, the command will succeed with something like
252 Couldn't verify <someone@there> but will attempt delivery anyway
This command will fail only if you pass it an address in a domain the server directly delivers for, and that address does not exist.
Most of the libnet client classes allow options to be passed to the
constructor, in most cases one option is called Debug. Passing
this option with a non-zero value will turn on a protocol trace, which
will be sent to STDERR. This trace can be useful to see what commands
are being sent to the remote server and what responses are being
received back.
#!/your/path/to/perl
use Net::FTP;
my $ftp = new Net::FTP($host, Debug => 1);
$ftp->login('gbarr','password');
$ftp->quit;
this script would output something like
Net::FTP: Net::FTP(2.22) Net::FTP: Exporter Net::FTP: Net::Cmd(2.0801) Net::FTP: IO::Socket::INET Net::FTP: IO::Socket(1.1603) Net::FTP: IO::Handle(1.1504)
Net::FTP=GLOB(0x8152974)<<< 220 imagine FTP server (Version wu-2.4(5) Tue Jul 29 11:17:18 CDT 1997) ready. Net::FTP=GLOB(0x8152974)>>> user gbarr Net::FTP=GLOB(0x8152974)<<< 331 Password required for gbarr. Net::FTP=GLOB(0x8152974)>>> PASS .... Net::FTP=GLOB(0x8152974)<<< 230 User gbarr logged in. Access restrictions apply. Net::FTP=GLOB(0x8152974)>>> QUIT Net::FTP=GLOB(0x8152974)<<< 221 Goodbye.
The first few lines tell you the modules that Net::FTP uses and their versions,
this is useful data to me when a user reports a bug. The last seven lines
show the communication with the server. Each line has three parts. The first
part is the object itself, this is useful for separating the output
if you are using multiple objects. The second part is either <<<< to
show data coming from the server or >>>> to show data
going to the server. The remainder of the line is the command
being sent or response being received.
Copyright (c) 1997 Graham Barr. All rights reserved.
$Id: //depot/libnet/Net/libnetFAQ.pod#6 $
| libnetFAQ - libnet Frequently Asked Questions |